https://completemarkets.com/Article/article-post/1548/OCCUPATIONAL-EXPOSURE-TO-FORMALDEHYDE/
...selection of personal protective equipment. PERMISSIBLE EXPOSURE LIMIT T...intended as a general description only and does not carry the force of legal o...
https://completemarkets.com/Article/article-post/1557/OSHA-HANDBOOK-FOR-SMALL-BUSINESSES-PART-4/
...ng necessary personal protective equipment and instructions for its use and ca...assist small businesses to meet OSHA standards. Because SBA's definition of a ...
https://completemarkets.com/company/CompleteMarkets/Articles/content-package/IMMS-Library/TabCategory/article-post/1548/OCCUPATIONAL-EXPOSURE-TO-FORMALDEHYDE/
... procedures, primary reliance on engineering and work practices to control exposure, and maintenance and selection of personal protective equipment. PERMISSIBLE EXPOSURE LIMIT The permissible exposure limit (PEL) for formaldehyde in all workplaces (including general industry, construction, and maritime, but not in agriculture) covered by the OSHA Act is 0.75 ppm measured as an 8-hour time weighted average (TWA) . The standard includes a 2 ppm short-term exposure limit (STEL) (i.e., maximum exposure allowed during a 15-minute period) . The action level' ... addition to setting permissible exposure levels, exposure monitoring and training, the standard requires medical surveillance and medical removal, recordkeeping, regulated areas, hazard communication, emergency procedures, primary reliance on engineering and work practices to control exposure, and maintenance and selection of personal protective equipment. PERMISSIBLE EXPOSURE LIMIT The permissible exposure limit (PEL) for formaldehyde in all workplaces (including general industry, construction, and maritime, but not in agriculture) covered by the OSHA Act is 0.75 ppm measured as an 8-hour time weighted average (TWA) ... (100,100) and plastic molding (90,000) . EFFECTIVE DATES Respiratory protection required to meet the PEL of 0.75 ppm must be provided; engineering and work practice controls and medical-removal protection should now also be operating. The labeling provisions should have been implemented at the end of 1992. Labeling of containers of formaldehyde products must continue to comply with the provisions of OSHA's hazard communication standard (29 CFR 1910.1200) until that time. Periodic training for all employees exposed to formaldehyde between 0.1 ppm and 0.5 ppm is also ...