https://completemarkets.com/company/CompleteMarkets/Articles/content-package/IMMS-Library/TabCategory/article-post/1661/SAFETY-AND-SURVIVAL-IN-AN-EARTHQUAKE-PART-2/
... of the home, or when you are sleeping. Location of a Smoke Detector The National Fire Protection Association states that smoke detectors shall be installed outside of each separate sleeping area in the immediate vicinity of the bedrooms, and on each additional story of the family living unit, including basements, and excluding crawl spaces and unfinished attics. For maximum protection, smoke detectors should be installed on the wall or ceiling in each sleeping room and in each hallway, corridor, or adjacent area to any such sleeping room. Where sleeping rooms are on an upper level, a detector should also be placed in the center of the ceiling directly above the stairway. Avoid installation in bathrooms and in areas exposed to heating and air-conditioning vents. Smoke detectors require minor periodic maintenance, such as dusting and replacing batteries ( ... bathtub and sink. Remove all flammable liquids such as painting and cleaning products to the garage or outside cupboard. Store in proper containers. Make sure your home or place of work has ample exits that will not be blocked with fallen debris. Fasten all top-heavy furniture such as refrigerators, tall bookcases, and glass cabinets, to the walls by means of hooks, angle brackets or braided wire. Install fasteners or latches on cupboard doors. Strong child-proof latches will work well. Apply the same precautionary measures to your places of work. Secure, or bring to the attention of the appropriate person(s ), apparatus that could move or fall, dangerous chemicals, and unreachable emergency shutoff switches. Hold a home earthquake drill. Provide your family with knowledge to prevent injury and panic during earthquakes ...
https://completemarkets.com/company/CompleteMarkets/Articles/content-package/IMMS-Library/TabCategory/article-post/1555/OSHA-HANDBOOK-FOR-SMALL-BUSINESSES-PART-2/
... OSHA offices. Additional checklists are available from the National Safety Council, trade associations, insurance companies, and other similar service organizations. SELF-INSPECTION SCOPE The scope of your self-inspections should include the following: PROCESSING, RECEIVING, SHIPPING AND STORAGE: Equipment, job planning, layout, heights floor loads, projection of materials, and materials-handling and storage methods. BUILDING AND GROUNDS CONDITIONS: floors, walls, ceilings, exits, stairs, walkways, ramps, platforms, driveways, and aisles. HOUSEKEEPING PROGRAM: waste disposal tools, objects, material, leakage and spillage, cleaning methods, schedules, work areas, remote areas, and storage areas. ELECTRICITY: equipment, switches, breakers, fuses, switch-boxes, junctions, special fixtures, circuits, insulation, extensions, tools, motors, grounding ... or walkway? [ ] Are standard guardrails provided wherever aisle or walkway surfaces are elevated more than 30 inches above any adjacent floor or the ground? [ ] Are bridges provided over conveyors and similar hazards? FLOOR AND WALL OPENINGS [ ] Are floor openings guarded by a cover, a guardrail, or equivalent on all sides (except at entrance to stairways or ladders)? [ ] Are toeboards installed around the edges of permanent floor opening (where persons may pass below the opening)? [ ] Are skylight screens of such construction and mounting that they will withstand a load of at least 200 pounds? [ ] Is the glass in the windows, doors, glass walls, etc., which are subject to human impact, of sufficient thickness and type for the condition of use? ...