Search CompleteMarkets

... For insulated towers, the ball gap should be clear of debris so that the ...beacons. A failure to execute a waiver for damage to property of others m...

... Use binoculars to verify that the rods are in place and in good condition since severe lightning hits may vaporize them. Guy wire anchor points should be grounded to the nearest radial by copper strap. For grounded towers, at least four 10-foot rods must be bonded to the tower base and in contact with the groundwater table. Soil must be tested to determine conductivity. For insulated towers, the ball gap should be clear of debris so that the bare metal is exposed. Insulated towers should have a static drain choke connected between the feedline and the station ground. Insulated towers should have two 12-foot loops in the feedline between the tower and the transmitter housing. Cadwelding the connections is recommended. All tower attachments should be grounded to the tower, and these connections should be inspected annually, since poor ... to erect fencing. Also, the effects of RF radiation emphasize the need to control public accessibility to certain areas. 11. OTHER CAUSES OF LOSS. Here are additional possibilities for loss: Since transmitter buildings are often located near a tower base, they can be damaged by falling ice unless they have been constructed properly. A failure to maintain strobe lights or beacons. A failure to execute a waiver for damage to property of others mounted on the tower, i.e., microwave dishes or antennas. A failure to install central source security systems, such as smoke detectors, motion detectors, and fire extinguishing systems. A failure to implement policies for regular equipment monitoring. 12. MANAGEMENT'S REFUSAL TO BELIEVE THAT A LOSS OF SIGNAL CAN OCCUR. With all the pressing daily issues of running a ...