Search CompleteMarkets

Enter one or more keywords to search.

Wildcards - "*" and "?" are supported.

Search results for: Heating-and-Air-Conditioning-Equipment
Results per page: Category:
11 results found
https://completemarkets.com/Article/article-post/1565/PROTECTING-WORKERS-IN-HOT-ENVIRONMENTS/
...in which increases skin temperature and allows the body to give off its excess...intended as a general description only and does not carry the force of legal o...

https://completemarkets.com/Article/article-post/1623/INDOOR-AIR-QUALITY-AND-HOW-TO-IMPROVE-IT/
...adways). The American Society of Heating Refrigerating and Air-conditioning Engineers (ASHRAE) in its 62-1989 standard recommends 20 cubic feet per minute...it to designated areas that have their air discharged directly to the outdoors...

https://completemarkets.com/company/CompleteMarkets/Articles/content-package/IMMS-Library/TabCategory/article-post/2326/PERSONAL-PROTECTIVE-EQUIPMENT-2/
... available from ANSI, 1430 Broadway, New York, NY 10018) . TORSO PROTECTION There's no part of your anatomy that you want to protect more than the torso, because without a torso, what's left isn't worth much. Many hazards can threaten the torso: heat, splashes from hot metals and liquids, impacts, cuts, acids, and radiation. A variety of protective clothing is available: vests, jackets, aprons, coveralls, and full body suits. Fire-retardant wool and specially treated cotton clothing items are comfortable, ... they adapt well to a variety of workplace temperatures. Other types of protection include leather, rubberized fabrics, and disposable suits. RESPIRATOR PROTECTION Information is available from OSHA on the requirements for respirators to control occupational diseases caused by breathing air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, sprays, and vapors (Respirator Protection- 29CFR 1910.134) . Respirators should be selected according to the guidelines of ANSI Practices for Respiratory Protection. REMEMBER: Using personal protective equipment requires hazard awareness and training on the part ... including broken or lost teeth) in 27% . Protection should be based on the kind and degree of hazard and should: 1) be reasonably comfortable 2) fit properly 3) be durable 4) be cleanable 5) be sanitary 6) be in good condition EAR PROTECTION Exposure to loud noise can cause irreversible hearing loss or impairment. It can also create physical and psychological stress. Preformed or molded ear plugs should be individually fitted by a professional. Waxed cotton, foam, or Fiberglas wool earplugs are self-forming. Disposable ...

https://completemarkets.com/company/CompleteMarkets/Articles/content-package/IMMS-Library/TabCategory/article-post/1567/PROTECTIVE-CLOTHING/
... be appropriate for the specific chemical exposure (e.g., solvents and caustics) . Cotton gloves provide some protection against the contamination of hands and cuticles with lead dust. Workers should wear clothing that is appropriate for existing weather and temperature conditions under the protective clothing. Heat stress: Workers wearing protective clothing can face a risk from heat stress. Additionally, heat stress may be an important concern when working in a hot environment or within containment structures. Heat stress is caused by a number of interacting factors, including: environmental conditions ... , when required. Disposable coveralls and separate shoe covers may be used, if appropriate, to avoid the need for laundering. Non-disposable coveralls shall be replaced daily. If an employee leaves the work area wearing protective clothing, the clothing should be cleaned with high-efficiency particulate air (HEPA) filter vacuum equipment to remove loose particle contamination; or as an alternative, the coveralls should be removed. Before respirators are removed, HEPA vacuuming or other suitable method, such as damp wiping, shall be used to remove loose particle contamination on ... . Gloves and protective clothing should be appropriate for the specific chemical exposure (e.g., solvents and caustics) . Cotton gloves provide some protection against the contamination of hands and cuticles with lead dust. Workers should wear clothing that is appropriate for existing weather and temperature conditions under the protective clothing. Heat stress: Workers wearing protective clothing can face a risk from heat stress. Additionally, heat stress may be an important concern when working in a hot environment or within containment structures. Heat stress is caused by a number of interacting ...

https://completemarkets.com/Article/article-post/1643/PERSONAL-PROTECTIVE-EQUIPMENT/
...equipment. Important safety devices-and yet data from the Bureau of Labor Stat...hicle in their fleet, in all receiving and storage areas, and every place where hazardous materia...

https://completemarkets.com/Article/article-post/2326/PERSONAL-PROTECTIVE-EQUIPMENT-2/
...njuries wore safety shoes or boots; and Only 40% of the workers with eye ... these advanced Personal Protective Equipment without being fully trained in t...

https://completemarkets.com/Article/article-post/1567/PROTECTIVE-CLOTHING/
...o are exposed to lead above the PEL and for whom the possibility of skin conta...intended as a general description only and does not carry the force of legal o...

https://completemarkets.com/Article/article-post/925/WORKPLACE-FIRE-SAFETY/
...on Friction-for example, overheating bearings Explosion of vapors, d...rm, disconnect any attached appliances and report it immediately. Keep th...

https://completemarkets.com/Article/article-post/1583/WORKPLACE-FIRE-SAFETY-2/
...ire safety in the home, in schools, and at work. But workplace fire safety is the Occupational Safety and Health Administration's (OSHA) principal focus, and saving lives and preventing injuries due to fire is a k... Use only the extinguishers, hoses, and equipment you are trained to operate safely and effectively. Use respirators as nee...

https://completemarkets.com/Article/article-post/1581/WORKER-PROTECTION-PROGRAMS/
...d paint abatement work, plumbing, heating/air-conditioning, electrical work, and carpentry/renovation/remodeling. Operations that generate lead dust and fume include the following: Fla...intended as a general description only and does not carry the force of legal o...